塑胶模具项目工程师岗位职责（2篇范文）

第1篇 塑胶模具项目工程师岗位职责

岗位职责:

1、 负责新产品的先期策划及新产品的标准、技术资料的制定;

responsible for new product advance planning and carry out new product std and spec.

2、 负责新产品的项目管理和周会主持

responsible for new product project management and weekly conference leading

3、 配合业务部做好客户的沟通和协调工作,协助采购/物流/质量部门对原材料及外协供应商的评定和认可;

assist business team to enhance the communication and coordination with customers, and assist purchasing/logistics/quality team to implement the investigation and evaluation for raw material and out-sourcing suppliers.

4、 负责编制项目控制计划、客户要求的质量文件(如fmea、ppap)并报上级批准,全程监督、跟踪和推动项目进程,及时反馈模具项目执行情况;

responsible for formulating project control plan and quality documents that customers requested (such as fmea.ppap),meanwhile, all control plans need to be approved by management level. responsible for monitoring, tracking and pushing project timeline and feedback.

5、 对注塑模(产品)项目进行前期评估,试模、小批量生产的可行性分析,安排对各阶段(包括试生产)项目评审

participate in the evaluations of injection tooling and injection product with the feasible analysis of trial-out and small production. besides, it is necessary to arrange the project evaluation every phase;

6、 主导新产品试制、交样;负责追踪试做安排及模具、工装、治具的开发和整改进度;

lead new product to make prototype and submit the samples. responsible for tracking the whole project processes for tooling, fixture and jigs

7、 主导工程变更的评估、确定、实施及验证

conduct the evaluation, confirmation, implementation and acceptance of engineering ecn

8、 负责新产品的成本核算和开发预算

responsible for cost calculation and development budget

9、 完成上级领导交办的其它事项;

complete the other tasks from management level.

岗位要求:

1、 大专或以上学历,机械、汽车或其它相关工程专业毕业。

college or above, preferred with mechanical, automotive or other majors.

2、 两年以上汽车行业工作经验,特别是汽车照明行业优先考虑,40岁以下、熟悉光学照明功能。

two years’ working experiences in automotive field, especially for automotive lighting. be familiar with optical lighting spec.

3、 熟悉操作办公自动化及二维、三维软件操作,有一定的英语基础(听、阅读、书写),

与国外客户有一定的沟通表达.

be familiar with oa, 2d software and 3d software (catia, ug or pro/e etc.). be capable of reading, writing in english

4、 有汽车行业、注塑、模具行业等相关产品类项目工作经验;

has project management experiences regarding automotive fields, molding injection or tooling

5、 熟悉apqp/ppap,懂iatf16949体系。

be familiar with apqp/ppap and know iatf 16949 system.

6、 要求具有主动性、目标性、效率性、时间性

the job will be requested by motivation, goal orientation, effectiveness and timing management.

第2篇 塑胶模具项目岗位职责

岗位职责:

1、 负责新产品的先期策划及新产品的标准、技术资料的制定;

responsible for new product advance planning and carry out new product std and spec.

2、 负责新产品的项目管理和周会主持

responsible for new product project management and weekly conference leading

3、 配合业务部做好客户的沟通和协调工作,协助采购/物流/质量部门对原材料及外协供应商的评定和认可;

assist business team to enhance the communication and coordination with customers, and assist purchasing/logistics/quality team to implement the investigation and evaluation for raw material and out-sourcing suppliers.

4、 负责编制项目控制计划、客户要求的质量文件(如fmea、ppap)并报上级批准,全程监督、跟踪和推动项目进程,及时反馈模具项目执行情况;

responsible for formulating project control plan and quality documents that customers requested (such as fmea.ppap),meanwhile, all control plans need to be approved by management level. responsible for monitoring, tracking and pushing project timeline and feedback.

5、 对注塑模(产品)项目进行前期评估,试模、小批量生产的可行性分析,安排对各阶段(包括试生产)项目评审

participate in the evaluations of injection tooling and injection product with the feasible analysis of trial-out and small production. besides, it is necessary to arrange the project evaluation every phase;

6、 主导新产品试制、交样;负责追踪试做安排及模具、工装、治具的开发和整改进度;

lead new product to make prototype and submit the samples. responsible for tracking the whole project processes for tooling, fixture and jigs

7、 主导工程变更的评估、确定、实施及验证

conduct the evaluation, confirmation, implementation and acceptance of engineering ecn

8、 负责新产品的成本核算和开发预算

responsible for cost calculation and development budget

9、 完成上级领导交办的其它事项;

complete the other tasks from management level.

岗位要求:

1、 大专或以上学历,机械、汽车或其它相关工程专业毕业。

college or above, preferred with mechanical, automotive or other majors.

2、 两年以上汽车行业工作经验,特别是汽车照明行业优先考虑,40岁以下、熟悉光学照明功能。

two years’ working experiences in automotive field, especially for automotive lighting. be familiar with optical lighting spec.

3、 熟悉操作办公自动化及二维、三维软件操作,有一定的英语基础(听、阅读、书写),

与国外客户有一定的沟通表达.

be familiar with oa, 2d software and 3d software (catia, ug or pro/e etc.). be capable of reading, writing in english

4、 有汽车行业、注塑、模具行业等相关产品类项目工作经验;

has project management experiences regarding automotive fields, molding injection or tooling

5、 熟悉apqp/ppap,懂iatf16949体系。

be familiar with apqp/ppap and know iatf 16949 system.

6、 要求具有主动性、目标性、效率性、时间性

the job will be requested by motivation, goal orientation, effectiveness and timing management.