开闭件工程师岗位职责（2篇范文）

第1篇 开闭件工程师岗位职责

开闭件工程师 上海伊狄达汽车技术服务有限公司 上海伊狄达汽车技术服务有限公司,伊狄达 main responsibilities主要职责:

1. be responsible for biw & closure 2d/3d part design, according to suggestion from cae/craft analysis department to modify product structure and craft;

负责biw/隔板的2d/3d部分的设计,根据cae/工艺分析部门给出的建议去修改产品结构和工艺;

2. be responsible for layout &performance design, checking and making proposals about biw system accessories and closure system, hinge ,check arm , sealing system, latch system, regulator, gas spring and other accessories;

负责biw系统附件及隔板系统、铰链、止回臂、密封系统、锁止系统、调节器、气弹簧等附件的布置及性能设计、校核及建议;

3. be responsible for preparation, review the bom, bop, typical section, gd&t, parts description, design report and other technical documents;

负责bom,bop,典型断面,gd&t,零件说明,技术报告等技术文件的编制、审核;

4. design , checking and motion analysis by using catia or ug software and etc.;

使用catia或者ug等软件去设计,校对以及动作分析;

5. design and release closure parts;

设计和发布隔板的部分;

6. be responsible for tracking and solving prototype vehicle and related parts manufacturing, trial production& process validation, production preparation and pre-pilot of the on-site technical support service.

负责跟踪解决原型车及相关零部件的制造、试制和工艺验证、生产准备和现场技术支持服务的预试。

job requirements职业要求:

1. vehicle, or mechanical major etc. with college degree or above, above 5 years of closure design experience in large or medium auto enterprises, design company preferred;

大专及以上车辆、机械等相关专业,五年以上中大型企业隔板设计经验,设计公司优先;

2. work experience of the tailgate and active bonnet system preferred;

有尾门和主动阀盖系统工作经验者优先;

3. knowledge of the main constrains of the process: stamping / welding /painting/ assembly line;

了解冲压/焊接/喷漆/装配线工艺的主要约束条件;

4. proficient in catia or ug etc.;

熟练使用catia或ug等软件;

5. good computer skills and english level;

良好的计算机技能和英语水平;

6. open mind and team work with people from different cultures,work seriously and responsibly;

思维开放并且可以和来自不同文化的人团队协作,工作认真负责;

7. able to travel on short notice and work outside for business related travel.

可以接受短期出差和公务相关的国外工作。

第2篇 车身开闭件工程师岗位职责

工作职责:

1)负责开闭件结构数模设计;

2)负责开闭件系统运动校核设计;

3) 负责开闭件bom编制及相关技术文档编写

4)负责开闭件数据发布

岗位要求

1) 大专及以上学历,车辆工程,机械设计等相关专业

2) 3年及以上相关工作经验

3) 熟悉车身开发流程及相关法规,熟悉车身钣金件制造工艺

4) 熟练使用catia 软件

5) 较好的沟通与协调能力