工程师engineer岗位职责（14篇范文）

发布时间：2023-10-17 热度：52

工程师engineer岗位职责

第1篇工程师engineer岗位职责

nvh engineer 声学工程师曼胡默尔曼胡默尔滤清器(上海)有限公司,曼胡默尔,曼胡默尔上海,曼胡默尔滤清器,曼胡默尔 job responsibility:

• gt-power simulation for snorkel noise, transmission loss, noise reduction, etc.

• virtual. lab (sysnoise) simulation for 3d acoustic performance, i.e. transmission loss, noise reduction, radiation noise, etc.

• fea simulation for dynamic stiffness, resonance, vibration, modal, etc.

• define nvh test plan acc. to customer sor/requirement.

• organize nvh resource internally and externally (nvh simulation and testing facility, etc) to support quotation and product development.

• acoustic tuning for intake system on dyno in acoustic room or test in test field, to control snorkel noise, radiation noise, insertion loss, etc.

• structure modal test, dynamic stiffness test, sound intensity test, sound power test, sound source identification, sound and vibration signal analysis, etc.

• create professional simulation and acoustic tuning report.

• discussion with product engineer for idea exchange to establish cad model, discussion with customer about simulation results.

• support for new idea validation from product & design engineers.

• support for quality issue, trouble shooting and solution searching

job description

job description prepared by/date:

job description updated by/date:

job description approved by:

education qualification

master degree or above, major in vehicle & engine, mechanics and mechanical engineer, acoustic engineering.

no. of years of experience

0-2 years, and special with talent, excellent master or phd can be considered as well.

professional exposure

(technical skills)

3d & 1d acoustic simulation,

acoustic & vibration fundamental,

digital signal process,

acoustic devices knowledge (sound source, microphone, acceleration transducer, hammer, etc),

familiar with engine and vehicle testing

preferred previous experiences

plastic component development experience

programming background, such as matlab, c++

work experience in oem or tier 1 supplier is preferred

functional skills

be good at ms-office software and presentation skill

basic vehicle structure knowledge under hood

behavioural skills

good communication skill, good team work

good hand work ability

ability to work under pressure

fluent in english

special knowledge/skills required

familiar with gt-power, lms. virtual lab, abaqus. muller-bbm,

any others

driving license c1

willingness to travelling and testing in customer

第2篇 seniordesignengineer高级电源设计工程师岗位职责职位要求

职责描述：

requirement:

1. bachelor degree in engineering ，electronics，or equivalent;

2. 10 years design working experience in related field / applicants in power supplies，driver or a similar company;

3. solid skills in analogue power/driver electronics design;

4. solid electronic component knowledge;

5. familiar with process design， line setup， process improvement， doe， fmea， autocad， solidwork， microsoft office

6. must be able to read， write and communicate in english (minimum passed cet level 4).

7.good problem solving skill，positive and aggressive.

job responsibility

1.product design and management until the time it goes to mass production;

2.technical support and transitioning new product platforms from erp-us d2&d team to production;

3.production and sales technical support for any sample request or product inquiry;

4. perform detailed electrical & magnetics design and cost analysis of each project to meet product requirement and cost;

5. perform detailed root cause and failure analysis within a short period of time;

6. provide solution to electromagnetic compatibility， electro magnetic interference， acoustic， dimming and safety requirement;

7. design and develop high efficient and high power density led power supply from prototype to production;

8. perform detailed test and verification to ensure product compliance versus the requirement;

9. provide detailed information to pcb and mechanical engineer to come up with the right solution for layout and overall product packaging;

10. other duties assigned by the rd management.

岗位要求：

学历要求：本科

语言要求：不限

年龄要求：不限

工作年限：5-10年

第3篇产品工程师engineer岗位职责

职责描述:

design & development

 lead and manage the customer negotiations regarding the specifications of the products to be designed and define the functional specifications based on the customer requirements, participate in the presentations for the developed products to the customer

 manage the development of the design concepts for the products (3d models, tolerance calculations, etc.)

 manage and perform the `functional reviews` at certain stages during the projects (fmea, design concept release, cad concept etc.) in cooperation with the manager r&d, manage the process of the functional product release of the products within the area of responsibility.

 patent check before gate, ensure that the patent rights for new/existing products are protected in cooperation with the legal department

 prepare and maintain the technical documentation regarding the products within the relevant product group

 coordinate all engineering activities with the production department in order to ensure the productbility of the designed products

 manage the processes of product modification in regards to the technical specifications during the serial production

 manage technical communication with prototype suppliers, i.e. material, durability, process, etc.

project management

 manage one or more projects under the lead of project manager and the manager r&d

 coordinate all required engineering activities within a project (concept development, design, simulation, acoustics and validation)

 establish the project plan regarding all required engineering activities within a project

 coordinate and support all activities within the project team to ensure that all required tasks are performed and all deadlines/quality gates are met

 plan, manage and control the engineering budget in the project; initiate and steer corrective actions in case of deviations

 define and manage the necessary internal and external resources for the projects within the product group to ensure efficiency during all project stages

 ensure compliance with the technical standards, processes and norms of m+h group during the project in cooperation with the director/manager r&d

 play the role as lpe to manage domestic development projects or local lpe for global projects.

validation

 define dv/pv test plan acc. to customer sor/requirement. design of experiment for trouble shooting and problem solving.

 define simulation & nvh plan acc. to customer sor/requirement. understand simulation & nvh report/results and accordingly guide designer for optimization.

 participate in the development and implementation of the testing equipment, tools and methods in accordance with the customer specifications

others

 coordinate the engineering activities with the other m+h departments and other m+h locations local, regional and global

 participate in/support the development and implementation of the innovation projects within the business unit

 provide support for fairs, tech shows and exhibitions to ensure that the m+h brand is promoted and new customers are attracted

第4篇应用工程师applicationengineer岗位职责职位要求

职责描述：

本科学历

bachelor degree

1年汽车行业工作经验。机械背景。有橡胶行业工作经验者优先

1 years experience in automotive industry. mechanical skills. experience in the rubber industry is a plus

英语或法语流利

fluent in english or french1.客户需求确认，零件设计，有限元分析

customer requirements clarification， design of parts， fea

2.领导项目进度

lead the project development

3.负责一切相关产品决策和疑问解答

to be the product referent

4.协调欧洲母公司和hirp之间的信息交流

to coordinate the information from europe mother companies and hirp

5. 跟踪哈金森研发系统，从报价请求到客户批准进行批量生产

to follow the hutchinson development system (hds) from rfq (request for quotation) to psw (the approval of the customer to go into serial production) approval

岗位要求：

学历要求：本科

语言要求：不限

年龄要求：不限

工作年限：1年经验

第5篇 qcengineer/qc工程师岗位职责职位要求

职责描述：

实施生产、生产效率、质量和客户服务标准；识别和解决问题，完成审核；实施系统改进；

·满足质量控制财务目标估计的要求；

·制定质量控制计划；确定关键控制点及预防措施；建立关键限值；监控程序；实施纠正措施；

·验证质量流程，通过建立产品规格；产品测试；编写和更新质量控制程序。

·准备质量文件：包括产品趋势，过程，稳定性研究，纠正和重新验证。

·维护和完成的产品，公司，制度，提高产品质量，以及合规性审计；调查客户投诉；与管理层的其他成员合作开发新产品和工程设计、制造及训练方法。

岗位要求：

学历要求：大专

语言要求：不限

年龄要求：不限

工作年限：无工作经验

第6篇 mechanicalengineer机械工程师岗位职责职位要求

职责描述：

knowledge and skill

1) about 2 years design working experience in mechanical field;

2) skills in mechanical drawing generating， including plastic part， sheet-metal part， extrusion part， etc.

3) familiar with product tolerance analysis; familiar in process and product assembly engineering;

4) skillful with solidworks， autocad， microsoft office;

5) must be able to read， write and communicate in english (minimum passed cet level 4);

job responsibility

1. drawing generating including 2d engineering drawing， assembly drawing， package drawing， etc.;

2. product/part testing for verification in deferent development phase;

3. other mechanical design related duties assigned by the rd management;

岗位要求：

学历要求：本科

语言要求：不限

年龄要求：不限

工作年限：2年经验

第7篇 documentcontrolengineer/文控工程师岗位职责职位要求

职责描述：

1. responsible for the checking and control of artwork documents for product.

负责产品包材印刷文件的文件审查和管理工作；

2. assistant hq to prepare the artwork of product;

协助总部准备产品的包材印刷文件；

3. review and collate the artwork after receiving it from hq and feedback the variance to hq for revising;

负责检查和校对收到的文件并将任何偏差反馈总部以便更改；

4. ensure to distribute all the artwork and requirements which has been finished and confirm to factory timely;

确保包材印刷文件及时准确分发到各个工厂；

5. collect any nonconformity of artwork from factory and feedback to hq for revising;

汇总工厂反馈的不符合信息，及时反馈总部进行更改；

6. ensure archiving all the artwork document timely;

确保将所有确认好的包材印刷文件归档保存；

7. others as assigned by department head.

其他领导安排的工作。

职位要求：

1.bachelor degree or above. more than 2 years experience relate to document making and controlling preferred.

本科及以上学历；2年以上文件制作、文件管理相关工作经验等；

2. excellent working knowledge of microsoft software packages

熟练应用办公软件；

3. good teamwork and cooperation

有良好的团队合作精神和协调能力

4. high anti-pressure ability， suitable for ot

有较强的抗压能力，并能适应加班要求；

5. good communication skills in english both written and reading；

良好的英文读写能力；

岗位要求：

学历要求：本科

语言要求：不限

年龄要求：不限

工作年限：2年经验

第8篇过程质量工程师/processqualityengineer岗位职责职位要求

职责描述：

position responsibility岗位职责

1.establish testing procedures for all production manufacturing processes， include process quality inspection and control document;

建立产品生产线过程检验程序，包括过程质量方面的检验和控制文件；

2.be responsible for daily production quality management， deal with suspicious products timely， collect process data and inspection record report on a regular basis;

3.be responsible for maintenance and testing of product inspection tools;

负责产品检具的维护和验证；

4.responsible for all calibration and maintenance of the company gauges and instruments;

负责公司所有量具和仪器的计量校准维护工作；

5.improves process quality competitiveness and customer satisfaction by driving continuous improvement activities;

通过推动持续改进，提高质量制程的竞争力和客户满意度；

6.handle customer quality complain and support of problem solving;

处理客户质量投诉，并支持解决问题；

7.participate the new employee skill training;

8.assist in the generation and maintenance of complete quality systems;

对完善质量体系提供帮助；

position requirements职位要求

1.bsme， bsee degree or equivalent ;

机械或电气专业本科；

2.experience minimum 3 years work experience in high volume manufacturing environment in a quality assurance function 2 - 3 years spc experience;

三年以上大规模生产企业质量管理经验，两至三年spc使用经验；

3.quality management knowledge (iso9000 system， control plan， fmea， spc， msa， ppap， customer specific system request， etc.）;

质量管理知识(iso9000，控制计划，fmea， spc， msa， ppap，客户指定系统需求等)；

4.ability to communicate in english well both in verbal and written form good analytical skills ;

可以使用英语进行口头和书面交流；

5. computer software to include， microsoft word， excel， powerpoint and microsoft project ;

使用软件包括microsoft word， excel， powerpoint and microsoft project；

6.various quality tools and measuring devices;

良好的分析能力，可以使用各种质量工具和测量设备；

7.expected to work extended hours if required; 如有需要可以加班；

岗位要求：

学历要求：本科

语言要求：不限

年龄要求：不限

工作年限：3-4年经验

第9篇 lcd engineer、手机 lcd 工程师岗位职责范本

1.对lcm及camera样品的确认。

2.lcm及camera相关问题的机解决和跟踪。

3.配合各项目组,保证lcd和camera满足项目进度要求。

4.对新产品lcd/camera的可行性评估。

第10篇机械设计工程师mechanicalengineer岗位职责职位要求

职责描述：

requirements:

1. college degree or above in mechanical/ electrical engineering;

2. 3 years working experience related in mechanical development;

3. experience in electronics products and familiar with small mechanical parts like metal and plastics;

4. experience in part qualification flow. familiar with packaging design (carton box);

5. skillful in using solid works， auto cad; familiar with ms office;

6. good english in both spoken and written;

7. be responsible and hard work， good team player;

8. experience in led driver is preferred.

job responsibilities:

1. generates 2d drawings， part samples check(ppap)， product verification and analysis.

2. package design;

3. product design as needed;

4. prepare technical approval reports and other assigned job.

岗位要求：

学历要求：本科

语言要求：不限

年龄要求：不限

工作年限：3-5年

第11篇 safety sw engineer 功能安全软件开发工程师职位描述与岗位职责任职要求

职位描述：

responsibilities:

review & clarify safety software requirements/solution

implement safety software according to coding guideline and iso26262 standard

implement and execute automatic unit tests and static code analysis

integrate software components

prepare relevant documentation

calibrate software to vehicle and electric motor

contribute to safety software integration tests， verify safety software functionality

requirements:

bachelor degree or above in electronic engineering or similar

3 years experience or more in embedded sw development

proficiency in c programming language

proficiency in debugging and testing embedded software

basic understanding of motor control and e-drive system

understand iso26262， experience in functional safety would be a plus.

familiar with autosar sw architecture

familiar with matlab/simulink preferred

good english communication skills

第12篇 seniordesignengineer/高级设计工程师岗位职责职位要求

职责描述：

1.design and develop new heating and fan products according to market requirements. design improvements to existing products. 按市场部要求设计开发加热器和风扇的新产品，改进现有老产品。

design and develop new products per requests prepared by product management， work with sales， purchasing， quality， operations and finance to release products that meet customer expectations， performance criteria and cost target.按照市场要求设计满足客户需要的性能，标准和目标价格的产品。

2.modify existing designs to match specific customer requirements.改进现有产品，满足客户要求。

customize/modify exisitng products to meet specific customer requirements， process engineering change orders (eco's) for product updates， upgrades， continuous improvements or corrections.定做或者修改，改进现有的产品，满足客户要求。

3. reverse engineering products and components.测绘样品制作产品图

reverse engineering products and components: decompose， measure， document and create components，assemblies and finished products; configure bills of materials (bom's) in erp system as well as 3d models and 2d drawings in cad system.设计三维和二维图纸并制定材料明细清单。

4. improve or modify products.改进或者修改产品

initiate product improvement ideas， document and submit for approval.提交改进现有产品改进方案。

5.technical support to relevant depts with product technology.

provide technical product support to sales， purchasing， quality， operations as well as external customers.给相关部门提供产品的技术支持。

6.solve the technical problems in production line with others.和其他部门一起解决生产线上遇到的问题

evaluate engineering change requests submitted by operations， resolve assembly， test and performance problems by processing engineering change orders（ecr） as required.评估工程变更，发放ecr 文件。

7.analysize quality issues with other team members.和其他部门一起分析质量问题。

evaluate deviation requests submitted by quality and determine disposition of affected components/assemblies.不良品的处置。

职位要求：

1.bachelors degree in mechanical engineering.学士学位，机械或相关专业

bachelor degree in mechanical engineering with major in thermodynamics or mechanical design.热力学或者机械专业本科以上毕业。

2.minimum 5 years of experience in mechanical design in related industry.至少五年本行业工作经验

minimum 5 years of experience in high-volume manufacturing environment producing commercial and /or industrial goods for liquid and gas fueled heaters， appliances and/or cookware.五年大批量工业产品经验。

3.liquid and gas fueled heater design experience required.有燃油或者燃气取暖器经验。

4.auto cad，3d software（pro-e， or soldworks.etc）熟练使用auto cad 和某种3d软件

proficient in cad 3d modeling and 2d drafting preferably using solidworks 2016 (autodesk inventor also considered)

5.experience in erp system， bom configuration and data entry， kingdee preferred，working knowledge of microsoft office (excel， words， outlook， powerpoint) and english language.电脑操作、英语熟练

岗位要求：

学历要求：本科

语言要求：不限

年龄要求：不限

工作年限：无工作经验

第13篇 seniorautomationengineer资深自动化工程师岗位职责职位要求

职责描述：

职位要求qualifications and skills needed to perform this job

1. 5 years above experiences in automation design 。具有5年以上自动化设计经验。

2. mechanical design knowledge and skills。具有机械设计的专业知识和技巧。

3. good communication skill and ability to work with teams with good consulting， coaching and facilitation skills in a technical environment 。良好的沟通能力和团队协作能力，在技术层面上具备咨询，指导和促进的能力。

4. skills in software including solidworks/pro-e and ms office。能熟练运用画图软件solidworks、pro-e 和办公软件ms office。

5. good organization and project management skill。具有良好的项目组织管理能力。

职位职责key responsibilities

1. mechanical design 机械设计

understand the machine mechanical structure and build the competence for copy， modify and design automation machine mechanical structure. 了解机械结构原理并有能力拷贝，修改，设计自动化机械。

2. project tracking 项目跟踪

as project leader， lead， direct， evaluate， and develop a team of project to ensure that the project is implemented effectively， consistently， and according to established guidelines and budgets.

review and analyse the data and information to identify trends and risks in the project. 作为项目负责人，领导、直接评估和发展一个团队项目，确保项目的有效实施，持续，根据建立指导方针和预算，审查和分析数据，评估风险。

3. design for automation 自动化设计

review all process with platform concepts and make sure its implementation in an effective and efficient way。审查所有生产平台，并确保其同过自动化实现有效和高效的运行

4. automation lead for production领导生产实现自动化

lead product family related work- such as automation platform solution， rfq(request for quotation)， dfm/dfa.支持和领导相关工作使生产部门实现自动化。

an attractive compensation and benefit will be offered！

岗位要求：

学历要求：大专

语言要求：不限

年龄要求：不限

工作年限：5-7年经验

第14篇 localizationengineer本地化工程师岗位职责职位要求

职责描述：